IDS-2204

In stock
SKU:
IDS-2204

Model Code: IDS-2204

- Redundant Dual Ethernet Ports: Recovery time < 10ms
- Switch Mode Supported
- NAT-pass through


Enquire Now
Enquire about this product:

LAN

2 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX

Feature

Present at ETH2
Power consumption: 8Watts max.
Over load & short circuit protection
Isolation Voltage: 1000 VDC min.
Isolation Resistance : 108 ohms min

Serial Connector

DB9 x 4

Serial Baud Rate

110 bps to 460.8 Kbps

Serial Data Bits

5, 6, 7, 8

Serial Parity

odd, even, none, mark, space

Serial Stop Bits

1, 1.5, 2

RS-232

TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND

RS-422

Tx+,Tx-, Rx+, Rx-,GND

RS-485 (4-wire)

Tx+,Tx-, Rx+, Rx-,GND

RS-485 (2-wire)

Data+, Data-,GND

Flow Control

XON/XOFF, RTS/CTS, DTR/DSR

LED

Power indicator
PWR 1(2) / Ready:
Red On: Power is on and booting up.
Red Blinking: Indicates an IP conflict, or DHCP or BOOTP server did not respond properly.
Green On: Power is on and functioning normally.
Green Blinking: Located by Administrator.
10/100TX RJ45 port
Green for port Link/Act at 100Mbps.
Amber for port Link/Act at 10Mbps.
Serial TX / RX LEDs
Red: Serial port is receiving data
Green: Serial port is transmitting data

Power Supply

Dual DC inputs. 12-48VDC on 6-pin terminal block

Power Consumption

5.5 Watts

Overload current protection

Present

Reverse polarity protection

Present on terminal block

EMI & EMS

FCC Part 15, CISPR (EN55022) class A
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11

Shock

IEC60068-2-27

Free Fall

IEC60068-2-32

Vibration

IEC60068-2-6

Serial operation mode

RS232 / RS422 / 4(2)-Wire RS485.
Which can be configured by DS-Tool

Safety

EN60950

Operation Humidity

5% to 95% Non-condensing

Operation Temperature

-20 to 60°C (14 to 140°F)

Storage Temperature

-40 to 85°C (-40 to 185°F)

Case

IP30,
52 (W) x 106.1 (D ) x144.3 (H) mm
(2.05x4.18x5.68 inch.)

Weight

682 g

Warranty

5 years