Category: Vehicle Display

Nexcom VMD1001

7" WVGA TFT, Touch, Light sensor, Webcam, Card Reader, All-in-one cable

The Nexcom VMD-1001 series are an IP54 sealed range of 7" WVGA TFT LCD monitor with 4 wire touch screen sensor. The unit is purpose built for the in-vehicle environment and can be interfaced to the popular VTC series or to any other PC.

Features include a high brightness display, optional camera sensor and integral speakers.

The units are available with an LVDS interface for long cables or the commonly universally used RGB interface. All signals (video, USB and power) are routed through one umbilical cable. This makes in-vehicle cabling secure and straight forward for vehicle installers.

During darkness hours a high bright screen can be a distraction to a driver, an onboard light sensor optimises viewing performance, power consumption and heat. For the high ambient light environments units can be offered with 1000nits luminance.

Contact us for more info

Enquiry *
  • 7-inch WVGA Touch TFT monitor
  • Works with all VTC range except VTC2000
  • Automatic/ Manual Brightness Control
  • Support USB 2.0 and Card Reader
  • Brightness: 500 cd/m² (typical)
  • Contrast Ratio: 600:1 (typical)
  • 4-wire resistant touch
  • Anti-Glare Coating Surface
  • Transmission Rate: 82 ± 3%
  • Control Buttons x 5, Power On/ Off, Volume Control (+/-), Brightness Control (+/-)
  • Light Sensor
  • LED indicators x 2
  • Built-in Speakers (1W) x 2
  • 1 X SD/ MMC/ MS Card Reader
  • LVDS Connector (integrating LVDS, USB x 1 and 12Vdc x 1)
  • Stereo Audio (Line out) x 2 (automatic detection/ switch to external speaker)
  • 2 x Mic-in
  • 1 x USB
  • Remote System Power On/ Off Button
  • 2.0M Pixels CCD Camera on Front Panel
  • Support VESA Mount Kit
  • 182 mm (W) x 138 mm (H) x 36.3 mm (D)
  • 0.45 Kg
  • Operating Temp: -20°C ~ 70°C
  • CE approval
  • FCC Class B
  • Computer aided despatch system
  • Driver fatigue system
  • Vehicle Infotainment System
  • GPS navigation system