TGPS-W9442GF EN50155 10-port managed PoE Ethernet switch
EN50155 10-port managed Gigabit PoE Ethernet switch with 4x10/100/1000Base-T(X) P.S.E. and 4x10/100/1000Base-T(X) with X-coded M12 connector and 2x1000Base-SX, multi-mode, 550m/850nm, Q-ODC connector, IP-67 grade
Downloads:
- Leading EN50155-compliant Ethernet switch for rolling stock application
- Support 2 Gigabit fiber ports with embedded Q-ODC interface
- Support O-Ring(recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
- O-Chain allows multiple redundant network rings
- Support standard IEC 62439-2 MRP*note (Media Redundancy Protocol) function
- Supports IEEE 802.3at compliant PoE and total power budget is 60 Watts with maximum 30Watts per port
- Support PoE scheduled configuration and PoE auto-ping check function
- Support IEEE 1588v2 clock synchronization
- Support IPV6 new internet protocol version
- Support Modbus TCP protocol
- Support IEEE 802.3az Energy-Efficient Ethernet technology
- Provided HTTPS/SSH protocol to enhance network security
- Support SMTP client
- Support IP-based bandwidth management
- Support application-based QoS management
- Support Device Binding security function
- Support DOS/DDOS auto prevention
- IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
- Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
- Support ACL, TACACS+ and 802.1x User Authentication for security
- Supports 9.6K Bytes Jumbo Frame
- Multiple notifications for warning of an unexpected event
- Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
- Support LLDP Protocol
- Wall mounting enabled
- IP-67 housing design
*NOTE: This function is available by request only
| Physical Ports | |
|
10/100/1000Base-T(X) with P.S.E. Ports in M12 Auto MDI/MDIX |
4(8-pin female X-coding connector) |
| 10/100/1000Base-T(X) Ports in M12 Auto MDI/MDIX | 4(8-pin female X-coding connector) |
| 1000Base-X Fiber Ports in Q-ODC connector | 2 x Q-ODC connector (Multi-mode) |
| RS-232 Serial Console Port | RS-232 in M12 connector (female A-coding). Baud rate setting: 115200bps, 8, N, 1 |
| Fiber Ports Specification | |
| Fiber Ports Number | 2 |
| Fiber Ports Standard | 1000Base-SX |
| Fiber Mode | Multi-mode |
| Fiber Diameter (µm) | 62.5/125 µm @ 50/125 µm |
| Fiber Optical Connector | Q-ODC |
| Typical Distance (Km) | 0.55 Km |
| Wavelength (nm) | 850 nm |
| Max. Output Optical Power (dbm) | -4 dbm |
| Min. Output Optical Power (dbm) | -9.5 dbm |
| Max. Input Optical Power(Saturation) | 0 dbm |
| Min. Input Optical Power(Sensitivity) | -18 dbm |
| Link Budget (db) | 8.5 db |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10Base-T |
| MAC Table | 8K |
| Priority Queues | 8 |
| Processing | Store-and-Forward |
| Switch Properties |
Switching latency: 7 us |
| Jumbo frame | Up to 9.6K Bytes |
| Security Featues |
Device Binding security feature |
| Software Features |
STP/RSTP/MSTP (IEEE 802.1D/w/s) |
| Network Redundancy |
O-Ring |
| LED Indicators | |
| Power Indicator | Green : Power LED x 1 |
| Ring Master Indicator (R.M.) | Green : Indicates that the system is operating in O-Ring Master mode |
| O-Ring Indicator (Ring) |
Green : Indicates that the system operating in O-Ring mode |
| Fault Indicator (Fault) | Red: Indicate unexpected event occurred |
| 10/100/1000Base-T(X) M12 P.S.E. Port Indicator | Left Green LED for port Link/Act indicator. Middle Green LED for PoE enable indicator Right Dual color LED for Ethernet speed indicator: Green LED for 1000Mbps, Amber for 100Mbps, Off for 10Mbps |
| 10/100/1000Base-T(X) M12 Port Indicator |
Left Green LED for port Link/Act indicator. |
| 1000Base-SX Q-ODC Port Indicator |
Green LED for Link/Act indicator |
| Power | |
| Relay | Relay output to carry capacity of 3A at 24VDC on M12 connector (A-coding female) |
| Power | |
| Input power |
72/110 (50.4-137.5) VDC on 4-pin S-coding, male connector |
| Power consumption (Typ.) |
17 Watts |
| Total PoE Output Power | 60 Watts |
| Overload Current Protection | Present |
| Reverse Polarity Protection | Present |
| Physical Characteristics | |
| Enclosure | IP-67 |
| Dimensions (W x H x D) | 208 (W) x 150 (H) x 89 (D) mm (8.19 x 5.9 x 3.5 inch.) |
| Weight (g) | 3300 g |
| Environmental | |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Operating Humidity | 5% to 95% Non-condensing |
| Regulatory Approvals | |
| EMC | CE EMC (EN 55024, EN 55032), FCC Part 15 B |
| EMI | EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A |
| EMS | EN 55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP)) |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| MTBF | 258,060 hours |
| Warranty | 5 years |
