VMC3021 - 10" AIO Vehicle Computer

In stock
Brand: Nexcom

10.4" Rugged Vehicle Mount Computer with Intel Atom® x7-E3950 processor, Touchscreen and IP65

Enquire Now
Enquire about this product:

10.4" Rugged Vehicle Mount Computer with Intel Atom® x7-E3950 processor, Touchscreen and IP65


·         10.4" XGA TFT LCD monitor with 5-wire resistive touch

·         Built-in Intel Atom® x7-E3950 processor, 1.6GHz

·         Aluminum die-casting and fanless design

·         Analog camera x 3 (CVBS)

·         Complete IP65 housing

·         Automatic/manual brightness control

·         Isolated CANBus 2.0 x 2

·         10/100/1000Mhz for independent ethernet x 2

·         On screen F1 ~ F10 programmable function keys

·         Military standard for vibration and shock

·         UPS Battery & PoE 802.3af/at (optional)

·         iButton and RFID for ID identification

·         Micro SIM x 2

·         Wide range DC input from 9V ~ 60V DC in

·         Sunlight readable capability: 1,200nits LCD brightness

·         One expansion port reserved

·         Operating system: Windows and Linux

·         CE/FCC/EMark

This product is listed in Mining, Transport, Nexcom, Mobile Computing

LCD Panel

10.4-inch TFT LCD panel with LED backlight 1024 x 768 pixels (XGA)

Brightness: 1200 cd/m² (typical)

Viewing angle: 140° (H):120°(V)

Contrast ratio: 500:1 (typical)

Touch Screen Sensor

5-wire resistant touch Anti-glare coating surface Transmission rate: 81 ± 3%

CPU & Chipset

Intel Atom® x7-3950 processor dual core 1.6GHz Memory One 204-pin DDR3L 1600MHz SO-DIMM slot (Default: 2GB)

Expandable Storage

1 x CFast 1 x 2.5" SATA SSD bay


3 x Full-size mini-PCIe socket (PCIe + USB)

1 x Full-size mini-PCIe socket (USB)

1 x CFast 2 x Micro SIM slot

I/O Interface-Front

LCD back light on/off Volume control (+/-) Brightness control (+/-)

Light sensor 4 x LED indicators (power/battery charging, WLAN, shift, storage)

F1 ~ F10 programmable function 2 x Built-in 2W speakers

I/O Interface-Lateral

Right Side
-1 x CFast card slot
-1 x System reset button
-1 x USB 2.0 host type A connectorr
Left Side
-1 x antenna for WWAN

I/O Interface-Bottom (VMC3021-4A1, IP65)

1 x M12 (22-pin)
-1 x 10/100/1000, LAN1 (wake up on LAN)
-1 x RS232 (Tx/Rx)/RS422/RS485 (RI, 5V/0.5A, 12V/0.5A)
-1 x DR (odometer + speed )
-2 x GPI
Source: 9V ~ 60V-in (default)
Sink: external 0V ~ 60VDC pull-high selected by software settings
Input High "1" Voltage: 3.3 ~ 60 VDC
Input Low "0" Voltage: 0 ~ 2 VDC
-2 x GPO
Source: 9V ~ 60V-in (default)
12V/6mA, 24V/12mA, 36V/18mA, 48V/24mA, 60V/30mA
Sink: external max. 0.5A pull high
1 x M12 (21-pin)
-1 x Mic-in
-1 x Line-out
-1 x full RS232/422/485 (RI, 5V/0.5A, 12V/05A)
-2 x Isolated CANBus 2.0B
When installing CAN06, CAN2 becomes J1939/ISO15675-4
When installing CAN05, CAN2 becomes J1708
1 x iButton
1 x M12 (5-pin)
-9V ~ 60V DC in (UPS battery: 12V, 24V, 36V and 48V)
1 x M12 (8-pin)
-Either of DC output or RFID
1 x DC output (12V/2A )
1 x RFID (Tx/Rx, 12V/2A)

I/O Interface-Top

2 x Antenna for Wi-Fi


Cooling system: Fanless Enclosure: Aluminum die castig
Mounting: VESA 75

Ingress protection: Complete IP65 Dimension: TBD

Weight: 3.5kg, 7.7lb

Power Management

9V ~ 60V DC in (UPS: 12V, 24V, 36V and 48V)

Reverse protection/over voltage protection/under voltage protection

Ignition On/O control & programmable On/O delay timing Wake up by LAN1, SMS, RTC and ignition


Operating temperatures: Ambient with air -30°C to 60°C

Storage temperatures: -30°C to 70°C

Relative humidity: 10% to 90% (non-condensing)

Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24
Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and
semi-trailers = 40g

Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground
equipment = 75g

Operating System

Windows 10 Linux: YOCTO (by request)


CE/FCC class B/E13